French Rally Sunny GTiR

Well, i've received my GT2860RS turbo today!!! i would be pleased to run max 330bhp with quick spool.

what do you think about the spec i think about :

- WRC type TMIC (already on)
- GT2860RS disco potato Turbo (bought but not yet on the car)
- 2,5" mongoose exhaust (catback and downpipe) (already on)
- Arc Recirc BOV (already on)
- Bogdan 3" elbow (not yet bought) (i'll think about changing the exhaust if i run it)
- 560cc injectors (not yet bought)
- AFR innovate and wideband sensor and gauge (bought but not yet on the car)
- EGT sensor and gauge
- Jam sport ECU (bought but not yet on the car)
- walbro 255lph

using all between 1.2 and 1.4 bar pressure

not sure using the Jamsport ECU, i'm thinking of buying nistune and tune the ECU myself.

any thoughts?

Sounds a nice spec that Fred. Your need a z32 afm as well tho.
Should make slightly more power than that with the 2860rs

yep agreed
z32 maf and go with nistune or other standalone ecu then map it
should see between 350-370 then

fred05 wrote:Well, i've received my GT2860RS turbo today!!! i would be pleased to run max 330bhp with quick spool.

what do you think about the spec i think about :

- WRC type TMIC (already on)


any thoughts?

Is that one of my Intercoolers mate ?.

Nice set up by the way should spool very quickly.


Rob

@rob, yes didn't you saw my pictures upwards?

ok guys! thanks for the help
what do you think about the 3" elbow and the 3" exhaust?? would that helps to get some bhp up?

what about EGT? can i plug it to nistune or not?

fred05 wrote:@rob, yes didn't you saw my pictures upwards?

ok guys! thanks for the help
what do you think about the 3" elbow and the 3" exhaust?? would that helps to get some bhp up?

what about EGT? can i plug it to nistune or not?

No I hadn't Fred, I'm really glad more people are following my lead with re coring the top mount let me know how it performs.

The 3" elbow and a 3" down pipe will definitely help with spool up mate, You'd be OK running a 2.5" system though with the power levers you're going for and it would be a tad quieter hopefully.

Rob

What sort of egt you got is it not just to a gauge ?

i don't have any EGT at the moment, i'm just thinking of putting one or not...will it help me to set up the car propperly or not?

Well, walbro fitted!

and after a good ride with my mates, my troubles with the reverse gear came back....i really have not any clue of what it really is...i think i will rebuild my gearbox as soon as possible...

my clutch pipe is leaking, and my slace cyl too, so i ordered a braided one and a new slave cylinder.... 

If the slave cylinder is leaking fred move it away from the gearbox you dont want it leaking onto the pressure plate ....

Good note nomad! Ill do.

updates! not many time these days due to large amount of work

- Apexi EGT gauge and sensor
- A pillar + pod to put the AFR gauge
- upper column cowl to EGTstick the EGT cauge
- 4 560cc injectors (Do you know where to buy new seals?)
- ECU with Nistune board inside



I'm waiting for a Z32 MAF with the blitz supa dupa mega magic power filter

As i didn't sold my Hispec kit, i will try to rebuild it...
- cleaning / blasting the bells + anodising
- new screws and nuts everywhere between bells and discs
- skimming on the discs
- cleaning blasting of the caliper brackets + anodising
- complete rebuilt of the calipers with new seals and pins
- new DS2500 or mintex 1144 pads

I began to cut some brackets for my kevlar bucket seat too, but not any time to finish them and bend them....

Well, so some work for Xmas!!!   

nice work fred thatll keep you busy

yep! thx, but for the moment, i only gather things!

tomorrow it's mini time, i need work on it to bleed the brakes and make it runs!
i hope to work on the GTiR in the evening and sunday

im in the same boat as you for time being fred ...........gathering and collecting things   

ive 2 huge boxes of uprated parts already to start on my project next week, oh plus an engine in a thousand pieces that needs re-assembling
bring it on   

yep Bob, good time building projects thinking about the pleasure you will have riding the powerful monsters!!! (i'm talking about minis of course   )

I finally put the compmos on...suits really well actually! 

Looks very nice fred

No, what about the white enkeis (spelt wrong I bet)?

Still in the garage Andy! it will look better with the bumper guard  ,  Ill keep the enkeis for next spring...
Thanks, but still lots of things to work on!

Here we go, blitz and z32 maf



I stripped it to clean the filter, but after 2 wash in hot water and soap, shit is still stick on the filter, and it is still oily...
Do you have a tip that clean better?

Something like wd then brake cleaner ? Then i use contact cleaner on z32 wire

Don't know if We will help to clean the dirt....do you use that on your filter Johnny?

I use carb cleaner on my z32 which cleans it then contact cleaner as that evapourates and takes the greasy like residue with it. Whats your filter made of ?

It's cotton fabric like k&n filter and i don't have any special spray cleaner for air filtres...