Rear brakes

Have a problem bleeding the drivers side rear caliper i've disconnected the rear hose to caliper but the pedal is still hard and no fluid coming out.All other calipers bleed with no problem,can anyone piont me the right direction?

Are the standard calipers ???

Flexi collapsed on inside ? Kink in brake pipe ?

Yes it was the flexi hose I now have fluid coming out the connector on the pipe but it's severely corroded, is that pipe one peace to the front? I only need to replace 350mm from caliper i was hoping to cut that section out and join in a new piece.

Mixed reviews but sure joiners are not a mot fail if you double flare them or somethibgb

Yup one piece all the way mate. I'd inspect the rest of the pipes, as johnny said could use a joiner but make sure the rest is fine or you are wasting your time.

Ok thanks, the rest of the pipe run is all good its just the end under wheel arch,all other pipes are in good condition wierd it's just that one corner that's corroded.

Drivers side union is seized so decided to replace both lines front to rear,is this a pig of a job?