Think I've found something clever

Was looking at the way the afm,s have been fitted in the gtr today
Both have been installed flush on the 2 x intake pipes similar to a blow by system except on the intake pipe so no housing fitted at all.
I was talking to someone the other day regarding doing this but can't remember who it was but evidentially a few people are doing this as a mod and the afm won't max out as it does at the moment
I may try this on the Rasheen when I get that far with the build

Il put some pics up of the intakes on the gtr so you can see what I mean

So you can modify the standard afm will it only work on standard intake ???

Not sure, il show you what I mean when I get a photo
But if this does work it will save people buying z32 and rewiring as only a 3 wire plug on the gtr

oh i remember talking about this its a poobaru mod but i cant find it anwhere on the net ive even had a word with my cousion as he is a poobaru nut an he has heard about the mod just never done it.

here you go
heres a photo of the gtr afm on the intake pipe, the sensor inside looks no bigger than the stock one in the gtir as ive had intakes off

So is that a stock gtr intake pipe then bob ? See what you mean by blow by set up .... whats the difference in parameters between the gtr & gtir ...????

Tbh I'm not sure if that is stock come to think of it as I've got aftermarket gtc induction kit

Il look at bens car on Thursday at Caldwell as he still has the stock air boxes fitted

I will be going too fast for you to see Bob!

ben15476 wrote:I will be going too fast for you to see Bob!

     Sounds like fighting talk that :p

ben15476 wrote:I will be going too fast for you to see Bob!

guess il buy a tow rope then  

now you going to Germany?

and could you do me a favour benjamin and take a pic of your air intakes to see if the afm is like mine or fitted to the air boxes   

Might do... Ask nicely

So if this works... Is it just a case of fitting the standard GTiR maf into the boost pipe going to inlet, then just having it mapped?

Here you go. I think this is what you mean (but its raining outside now so this will have to do)

cheers ben

yes guys basically the same thing in pic ben has posted above where hot wire is direct into intake

I may try this with a stock afm on rasheen after pulling it apart, and put it to direct airflow and see what happens with regard to duty its at
if as im told that it does work then that will eliminate the need for z32 afm (up to certain bhp anyway)