Got my pulsar on the road! :)

Finally got it mot'd yesterday



Then took it on a little journey to bed the brakes in better, having a bit of an issue with the clutch hydrolics, it seems to loose pressure ever so slightly if you hold the clutch down any longer than about a second, so unless you do a quick change its difficult! Have tried bleeding but couldn't get any fluid out!

Dispute that though, it's been amazing, and it is very fast !



I do have the little tow cover, but going to mastic and screw it in so it can't fall off (get stolen!)

Nice one Beau, maybe your clutch master cylinder is on its way out?

Good to see another one out to play. Enjoy.

Mine done the same beau then it gave up turns out its the clutch master pumps no fluid through so could be the seals inside it so going to just change the whole thing rather than chuff about with it ...

do these air lock ? gravity bleed or pressure bleed ?
as said sounds like seals

pressure bleed.
complete new master cylinder is best way forward if proves to be issue (does sound like it)
They not expensive ...
ADN do master & slave >

Master - P/N ADN13439
http://www.blue-print.com/Newweb/imageII.asp?PN=ADN13439&TN=
Slave - P/N ADN13634
http://www.blue-print.com/Newweb/imageII.asp?PN=ADN13634&TN=

Just managed to get it to bleed up! I was trying a 1 man bleeder, tried old fashioned method of 2 people and it bled up straight away, hoping this solves the issue! Time will tell

raced a modified nissan gtr last night, i did well  

made a little video earlier, just rolling and then accelerating in 2nd gear.

https://youtu.be/qp12dS7e1vw

that sounds fooking loud   

Awesome    i guess you stuck to the speed limit like a law abiding citizen   

That's loud, how much boost you running?

it is in mph, no idea what the actual speed was though, pmsl

boost is set at 2 bar