Lower arm price

Stopped by my local Nissan dealer to get a price for the few things i need since mot, pleased that and r/c gasket is only £14 but nearly fell over when he told me the price of the lower arms  
Who wants to hazard a guess...?



ADL BluePrint part no's:


LH - ADN18669
RH - ADN18668

Lower arms from japarts are was around 130 140 so i would say 240 ?

£126+ the vat

Very close Leighton, i was quoted £260 each! The guy was really helpful and told me to check out a company called SRB Power so will do that at some point.

Christ they've gone up in price hugely
ive got 2 good ones down here if needed, just need a dust cover on balljoint which are about £3 each on ebay

Ok cheers Bob ill let you know, just waiting to hear back from another source.

ok, if you need them let me know and il bring them to the sprintday, have a s/h genuine Nissan rc gasket which you can have also if you want it

Ok will let you know about the arms before sprintday and ive already ordered r/c gasket so ill just fit that when it turns up cheers.

https://gti-r-us.forumotion.co.uk/t1304-nsf-wishbone?highlight=wishbone

what a price!!!

Dont expect anything else from nissan fred abit like the cv boot kit from then it was 50 odd quid when you can get them from less than a tenner its just jokes mate .

yep, i saw this with the bumper part wich is always missing...huge...

Just an update on price. Managed to get a set last month for £115+vat a side from my local motor factors. Think they are blueprint so should be ok as most of their stuff is good.

http://www.ebay.co.uk/itm/280662619675?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.ebay.co.uk/itm/270737766211?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Got these saved in my ebay just in case.

knights of nee wrote:http://www.ebay.co.uk/itm/280662619675?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
http://www.ebay.co.uk/itm/270737766211?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Got these saved in my ebay just in case.

Have you used these then? They look exactly the same as the ones I've got.

pulsarmoley wrote:
Have you used these then? They look exactly the same as the ones I've got.

No not needed to mate, I just found them while searching for other Pulsar shite.

I'm sure they have to meet some kind of standard so should be perfectly OK.



Rob

ADL BuePrint should be fine but check the inner bush if supplied as may not be the GTiR specific one.
Would only bother getting new arms if old ones rusted, cracked or bent, If good best doing a refurb: Powder coat, new quality BallJoint & Poly-bushes Which should come in cheaper than a cheap arm but will be quality ...

+ 1 for M. B!!

I just seam welded mine up and ill be sending them for powder coat next week 

Where is best place to get the ball joints? In the future i do wanna get some adjustable made up with rose joints but thats next winters job i think

Greygtir wrote:I just seam welded mine up and ill be sending them for powder coat next week 

Where is best place to get the ball joints? In the future i do wanna get some adjustable made up with rose joints but thats next winters job i think

I'm having mine powder coated as well, I did have the ones on my last car seem welded as well.



Rob

http://www.importcarparts.co.uk/parts_info.asp?id=1684&cat=87&sub=119&sec=1184&var=0&dc=&gen=&searchKey=

Thank you sir

Ball joints can be had at any local motor factor either off shelf or next day normally. Delphi, ADL, SolidAce & TrippleFive all list for GTiR. TrippleFive are very good quality japanese parts & sometimes what you get in the box from ADL.

What sort of prices mr b ?

Mr B wrote:ADL BuePrint should be fine but check the inner bush if supplied as may not be the GTiR specific one.
Would only bother getting new arms if old ones rusted, cracked or bent, If good best doing a refurb: Powder coat, new quality BallJoint & Poly-bushes Which should come in cheaper than a cheap arm but will be quality ...

I'll check so cheers for that. Mine has worn ball joints, bushes and generally looks rusty/crap so would rather replace.