Fuel Injector Upgrade

Hello all,

The following is a copy of my post on the GTIROC forum earlier, but I'm posting here in case some of you are not a member over there.

Technical question here. I'm upgrading the injectors to Injector Dynamics 1050. These are a different pigtail - USCAR. They came with the pins and pigtails to hardwire in, but I would like to make a plug-and-play solution that is easily reversable (i.e. not cut into the wiring harness).
So with all that being said, what type of pigtail/connector are our stock injectors? Is it Denso? If so, is this what I will need to maintain plug-and-play?

https://www.rallysportdirect.com/part/fuel-injector-components/ind-90-3-injector-dynamics-fuel-injector-pnp-adapter-uscar-to-denso

Appreciate your help/knowledge on this.

alphadrex

Something like that, but if the picture is correct, that's the wrong type.

Something like this maybe?

https://www.wiringspecialties.com/injector-adapter-nisev1/

Stock injectors are Bosch ev1.
Those ID1050 looks like Bosch ev 14
Nice injectors bud!