Clutch pedal support bracket

Does anyone know where i can get hold of a Clutch pedal support bracket?

On the later pulsars they had them but one of the lads on the forums used to make them you could check usy if you have one already mate failing that if somebody has one il be happy to knock up a batch. ..

Yeh leighton i checked to see if it had 1 but unfortunetly its not got 1
It still looks strong but its developed a clicking sound so i guess i need one?
I noticed steve pudney was making them but according to his thread he's no longer making them...I've emailed him thou so i'll see what he says?

just make one yourself, its only a twisted bit of metal with 2 bolt holes in it, doddle to make

Yep thats the fella. ...get a torch up there make sure its not started splitting mate better to catch now otherwise its dash out time lol

It seems ok but the clicking sound can feel it vibrate throw the pedal?
Not sure how to make it?

Ive given up waiting for a response from Steve, paid and order mine a few months back. Both were sent out, but have not been received and I've not heard from.him since

Thats no good

If you can wait a few weeks il mock one up off of mine would do it sooner but im working weekends as soon as ive knocked one il do a template up ill do a few more. If anybody will be intrested.

Leighton you can put me down

nomad29 wrote:If you can wait a few weeks il mock one up off of mine would do it sooner but im working weekends as soon as ive knocked one il do a template up ill do a few more. If anybody will be intrested.

i would if i were you leighton, theres a few people after them and there nothing special, steve pudney was charging a tenner for them which aint bad when even i could knock a few of them up in an hour no problem.

all you need is a strip of metal around 10mm wide 40mm long by around 1mm in thickness, twist it to a 90 degree angle and drill a hole either end
simple as that

Thats sorted then i will have a look next week aslong as i dont have to work and knock a few up ..... 10 mm wide is that all i thought it was wider than that ..?

yep im guessing but could be 15mm

Il have a proper measure up trouble is its dark when i get home now bloody winter it depresses the shit out of me lol still might get sunday off so il do it then if i havnt got my brother in laws 306 to do.

I'll take one mate if you do get a chance, don't fancy the pedal.coming away

No worries bucky

So far....

1.Usy
2.bucky
3.
4.
5.
6.
7.
8.
9.
10

gtirus wrote:
all you need is a strip of metal around 10mm wide 40mm long by around 1mm in thickness, twist it to a 90 degree angle and drill a hole either end
simple as that

1mm? pretty sure mine from Steve is about 3mm thick...

I dont think it matters if its 2mm 0r 10mm aslong as its bolted tight it shouldnt flex but will make them more than 1mm lol

johnnys got the last one from us so im sure he could measure it i just guessed at the measurements

It dont matter fella i will see what i can do with it and measure up properly when i get a chance if all goes well might have a mock up of the master cylinder stopper once ive done a few of these.

I have one in the workshop if you want me to get some measurements?

Yeah that would be great mate if you could

i will do this tomorrow, had a rough day today

well couldn't find it anywhere then realised that i'd already fitted it anyways got some measurements for you:

3 mm thick steel

around 3 inches long but once its twisted its a few mm less

hope this helps