AEM boost solenoid with profec 2

Hi guys.
I have bought a greddy profec b2 that has an aem boost solenoid.
Does anyone know if I wire the solenoid straight to the boost controller wires.
The wires are green and white from the boost controller.
The aem has 2 brown wires and instructions say any one of those wires can be put to positive feed.
The profec b2 has a live and earth wire so I guess that will be the switching live feed for the solenoid.

You got a multi meter mate ?

No mate.
The guy I bought it off has confirmed that those two wires go to the solenoid as I suspected.
I down loaded the profec pdf aswell and it says they are for the solenoid.
Am says on their pdf that it doesn't mater which way you wire it up.

They 100% do was just going to say put the controller across a battery and test the voltage on the two wires that feed the solinoid

Ah okay.
The guy I bought it off had been using it for a long time so woukd have thought it was okay?
As long as I get a 12V feed to the controller?

Yes mate if both are 12 v put it across a battery try it then try solenoid then wire that to controller all off the car then fit it all mate

Thanks Johnny