Almera n15 front abs sensors

They work

And all i did was cut the plugs off and joined the old plug onto the new sensor wiring

They are the same length and clamp on the strut tower in the same place, the other bracket is not used on mine as i have gab struts and there is no clamp for it so itll just be cable tied to the strut.

Now as for which way the wires go i dont know, as ive wired it both ways and it still works.

Also, the colour of the wires on the sensor could be different between manufacturers, mine were grey and brown on the new one.

Great info mate

Was the plug you cut off the n15 like this?

Looks the same as the gtir ones.

For reference:

FRONT RIGHT ABS SENSOR NISSAN ALMERA N15 47910-0M000

FRONT LEFT ABS SENSOR NISSAN ALMERA N15 479110-M000

Yes, thats the same plug i cut off, but the pulsar one has a female connector not a male as on the almera one, thats the only difference other than the wire colours.

That good to know, did mention in another thread should be likely fit one with some tweaking, just plug swap is super simple ...