Tie rods

Would anyone know if the inner tie rods are M14x1.5 (rack end) and M12x1.25 (ball joint end)?

Does anyone know a reliable website that I can use to compare to tie rod lengths and threads? Its annoying getting info from all different sources.

Here you are Woody, I've just measured one of my new ones for you.
Overall length is 280mm
Outer thread length is 54mm
Outer thread size is M14x1.5
Inner thread length is 15mm
Inner thread size is M16x1.0
Distance between inner socket and outer thread is 179mm
Nissan part number is 48521-60Y05

Rep point for being so helpful chris .....

Thanks heaps for this Chris

No worries fella, glad to help you out , thanks for the rep points lads

Well im trying to remove the inner tie rod, its got a metal lock tab which looks like im going to fook getting off. My new tie rods didn't come with the locking tab, can I just use some thread lock and all good?

Also on the passenger side there seems to be a metal washer and a rubber o-ring just floating around on the rack shaft, im guessing this isn't normal. Ive touched a rack before

EDIT - if you have pictures of your rack please show me

http://www.gtir-motorsport-club.com/t5106-steering-rack-inner-ends

if lucky/careful you can reuse clinch washers, if not get new P/N 4863550A06

not sure on your oring-washer scenario
diag of rack parts below >

Thanks mate, I'll have another look. I actually found the clinch washers that came with the rods, they look completely different though.

Got the old tie rod off this arvo. This is what I was talking about, it's actually a plastic washer. It would be part of the rack seal.