Stripping rocker cover

What's the best thing to strip the paint off my rocker cover?
I have started sanding by hand.

Thats taken me an hour.
I have taken the black off. White off and a grey primer. Theres an ivory colour still to go.
But as you see im only 1/3 through the first 3 coats.
Would nitromorse (sp) be okay to use?
Thanks in advance.

i nitro morsed my whole mini! it was painted with 5 different coats at the time, just make sure you wash it afterwards to get all residual stripper off or it'll fuck your paint up.

Okay. Thanks for the reply.

Don't use nitromors, its crap, use some like starchem synstrip.

I used nitromors. It took 4 applications and still left some parts untouched.
Thats better than having to sand it all off by hand tho

When i did mine i nitro moresed it right down to bare metal . ... and used a wire wheel inbetween coats ... just make sure you keep your mouth closed while doing it as it doesnt taste very nice

i nitromorsed mine too, 1 application and it was down to bare metal, tried nitromorsing an alloy wheel, never again...

Really sye .... mine took fooking loads of coats and think it was standard painted from factory .... still after all the effort of making it shiney i might spray it lol ...

Acetone is good will strip anything

So trip to the pound shop and get a fook load of nail polisb remover then lol ....

What colour you going stu?

gtir_woody wrote:What colour you going stu?

Its a secret
I fucked up the primer tho used an old can and it has come out with loads of bobbles all over it.
So need to rub it down...

Let's be honest stu, you are going pink right?

gtir_woody wrote:Let's be honest stu, you are going pink right?

Get a load of old battery acid and lay cover in a tray overnight then thoroughly wash it off the next day.

Or as Tom suggested acetone is a good remover of paint or anything else come to that