Whiteline springs and bilstein struts

Hi all
I'm looking at some point at doing my suspension, don't really wont to go for coil overs so i was thinking whiteline springs an koni shocks but ofcourse everything good for pulsar is discontinued or i can't find it

So do you guys know if whiteline spring are still available and if yes where i can find them or any other descent springs I can only find spax but i don't want that big drop

Another question since koni discontinued gti inserts and those for suzuki baleno too i thought about blistein conversion but again can't find what sort of cartridges people use so any help would be much appreciated

Mike

For springs you best getting custom made using say whiteline as a base model, in uk a good company is springcoil.co.uk, they have immense knowledge on suspension & should be able come up with good springs to required spec. Once they have patterned/tested one set future supply & tweaking slightly for ride height & spring rates is easy for them ...
For inserts lots of things can work.
Koni baleno & maxima inserts can be found if hunt the part numbers on google as some companies have stock. Also get koni uk to provide closest match that is available ( more stroke would be better as baleno & maxima are short stroke as is) damping rates not important as will get changed anyway.
Bilstein can use likes of R30 or R36 inverted mono B6 inserts pending on what R strut tubes you use. R36 is best as the valving on 36mm pistons is more detailed profiling & potentially more tunable.
Bilstein will make inserts to length etc but not cheap compared to off shelf part.
RX7 & mitsi 3kgt inserts are popular for cross fitting & can be made to work & base stroke range increased by about 20mm. buying off shelf insert part can be as cheap as £100 (shop around for clearance), custom could be close to double or more. all will need revalve work to suite application.

Thanks Mr B I owe you a beer