Sump guard and whiteline underbrace

Well, as on my car the engine sump take a stone and be embossed badly, i'm thinking to put a sump guard more putting a whiteline underbrace i bought time ago.

Is it possible to put them together or not?

do you have any pictures of them all mounted together?

Will the underbrace be sufficient to protect?

Do you mean sump guard or the bumper guard the one with the little lip that curls around the front of the bumper

bumper guard the one with the little lip that curls around the front of the bumper, but where does it stops under the car?

it does not cover the sump fred so you wont gain anything really
you would be better off fabricating something up to cover it

hum....i think i do have some kevlar plates....large enough and thick enough to protect the sump...i need to investigate in my parent's garage!

Someone years ago made some that were longer so would cover the sump
Think it was done via the gtir homepage,but can't remember if there was enough interest in them to cover the min number needed to make it worth making them

yep... on the fusion motorsport website i found a sheet with a picture showing a sump guard...but i don't know if it is genuine or aftermarket thing...

http://justjap.com/store/product.php?productid=16747&cat=251&page=6 not sure if these fit are cars or not ?

Omp still make them I think

http://www.ompracing.com/prodotti.html?categorycode=GPROTMOT&changelanguage=en

fred05 wrote:yep... on the fusion motorsport website i found a sheet with a picture showing a sump guard...but i don't know if it is genuine or aftermarket thing...

That is a pic of the Group N sump guard, ripped direct from the manual.

Great that omp still make them! I will try to call them directly to ordre one and See the price!

Still be cheaper to make it yourself fred aslong as the plate is thick enough and you could always weld a couple of strips to it to make it stronger ...

Yep there is even the size writen on the website!
2 length are available but the shorter one is better for my use i think...more than that it Makes the bumper stiffer and it protects all.

Whats that the omp ones fred ?

robd wrote:Omp still make them I think

http://www.ompracing.com/prodotti.html?categorycode=GPROTMOT&changelanguage=en

Here it is nomad!

To use with underbace/custom large bore front pipe you will best to make one yourself & it is a really easy project as underbrace can help in being a mounting point, if you have the Nissan bumper guard you can mate the sump guard right up to it.

the measurements are on this page, http://www.ompracing.com/lista.php3

I cannot find it on the page  

Here are the specs, 2 are available :

SUMPGUARD
part number : BA/396
Length mm: 1000
Width mm: 750
Note: In duralumin 5 mm thick


Part number BA/397
Length mm: 540
Width mm: 666
Note: Differential guards, in duralumin 3 mm thick

Cheers fred .... think il just make my own when it comes to mine being back on the road .

i found the price of the big one the link is HERE

505 euros so 450 pounds...