street racers

Gaz GTiR wrote:Did you get any video's Moley?

Yeah Ive got video's of almost everyones run. Can these be uploaded via photobucket does anyone know?

Girl racer wrote:Nice pictures Pete

Ben had a VERY good result

The Scooby made 241 BHP and 322 Nm (not sure what that converts to!) I did expect it to be more though

Thanks Kerime, 322nm = 237lbft  

pulsarmoley wrote:

Gaz GTiR wrote:Did you get any video's Moley?

Yeah Ive got video's of almost everyones run. Can these be uploaded via photobucket does anyone know?

Girl racer wrote:Nice pictures Pete

Ben had a VERY good result

The Scooby made 241 BHP and 322 Nm (not sure what that converts to!) I did expect it to be more though

Thanks Kerime, 322nm = 237lbft  

Thanks Pete, got to say though when he run up the car it was in 4th, the boost doesn't hit 1.3/1.4 bar in that gear so don't think it had the full potential

Yes think you can upload vids of photobucket, the same way you add pics?

just been talking to some guys on gtroc about my dyno reading and evidentally the maha rollers are known as heartbreakers lol
 
they said take those results with a pinch of salt which means little bens car may be making more than the 427 and same goes for the others too as well as mine.
think he could also do with some new grip on the rollers as the bigger powered cars were slipping

GTI-R US wrote:just been talking to some guys on gtroc about my dyno reading and evidentally the maha rollers are known as heartbreakers lol
 they said take those results with a pinch of salt

I can believe that as I cant see how I could of lost 24lbft and only gained 10 hp after new exhaust, headwork and raised compression

Gaz GTiR wrote:Yes think you can upload vids of photobucket, the same way you add pics?

Cheers ill check it out

GTI-R US wrote:just been talking to some guys on gtroc about my dyno reading and evidentally the maha rollers are known as heartbreakers lol
 
they said take those results with a pinch of salt which means little bens car may be making more than the 427 and same goes for the others too as well as mine.
think he could also do with some new grip on the rollers as the bigger powered cars were slipping

That's why my R didn't make the 600bhp I was hoping for   Damn rollers...  

could always have another RR day at another location. could see if the one i use can do a deal, having said that, the northern lads will have a bit of a trot

Id be up for that as it wasn't an expensive day really

We could do with 1 like weve just had between north folk & you southern fairys so its fair on everyone for traveling & the prople that live near the RR are the lucky ones

im gonna slap my car on some hub rollers and see what it makes or il give Charlie a bell at srr and put it on there
im really curious now as most are making 640-660bhp on v power  
by my readout that I get we should be able to calculate the difference and work outthe percentage of losses to everyones car which will give you all a rough indicator of what the cars actually making
 
its ok using their rollers as a comparison if you use them again for mapping or whatever then youll be able to see the improvements on the same rollers but seems the figures may actually be way off if im honest

Gaz GTiR wrote:We could do with 1 like weve just had ao its fair on everyone for traveling & the prople that live near the RR are the lucky ones

yeah you're not wrong, was in 2 minds whether to mention it, i'll get a quote anyway

Bob, torque developments international (tdi) at Lakeside have a hub dyno, if that's any help as its local  

yeah I was thinking of tdi I just don't like the bloke who runs it

Whys that Bob? My mate works down there and after the result on sunday was thinking of getting mine done again as you said for comparison.

i rang them before i found my local one, they said yeah no problem on the rollers but sorry can't service a pulsar  

is there a bloke calld graham that still runs it or works there?

Not sure Bob, I only know one guy there called Shaun, he has a nice track Scooby hes built over the last few years.

can you get me a discount from your mate then pete, I can run it down there at anytime, im just itching to see what the figures actually are now

Ill ask him, when I asked before he said he would do it for cash if the boss wasn't in on a Saturday. Ill let you know when I hear back from him.

He says they charge about £125 all in or privately would be about half that.

It sound like I missed a cracking day hopefully the next one ill be Able to make it and not be working .. Bob if you made that power on them rollers that's is good going the next roller you go on you would see another 50bhp ..

yep you did miss a good day lenny shame you couldn't make it

right all will be told next week as I have my car booked in at srr for a dyno run next Thursday

as said we should be able to get a rough idea of % drop from my car which will give everyone else an indication of what their cars are actually making

https://www.youtube.com/watch?v=-cB2ZRrpTxc&feature=youtube_gdata_player

nomad wrote:https://www.youtube.com/watch?v=-cB2ZRrpTxc&feature=youtube_gdata_player

Thanks lieghton, what would I do with out you   xx