HomeHi all just to make sure are all sr20det stem seals the same??
Gtir Motorsport club
Gtir Motorsport club
Welcome to the largest Nissan Pulsar & Sunny GTI-R Forum. Masses of info, friendly members, cars for sale, lots of spares. Best forum on the net by far. Everything your gtir needs is here.
Stem seals
+3
Mr B
buckym120
Gostek
7 posters
Message [Page 1 of 1]
2 Re: Stem seals 26th April 2015, 10:38 pm
buckym120
Don't believe they are, our inlet seals are smaller in diameter to the exhaust side
3 Re: Stem seals 26th April 2015, 10:56 pm
Gostek
Events Organiser
But will eg 200sx seals fit to gtir??
_________________
4 Re: Stem seals 27th April 2015, 8:28 am
Mr B
gtir technician
SR DE & DET will fit inlet, most SR with sodium filled exhaust valves are same size from what I seen.
I always buy Nissan OEM as basically fit better (perfect) & never get any hassle.
I always buy Nissan OEM as basically fit better (perfect) & never get any hassle.
5 Re: Stem seals 27th April 2015, 7:57 pm
Gostek
Events Organiser
I was looking at supertech stem seals but I might give nissan a ring first problem is that they are useless and always crying when asked to check something for a import...
Anyway thanks a lot
Anyway thanks a lot
_________________
6 Re: Stem seals 27th April 2015, 8:26 pm
johnny gtir
moderator
I always belived nissan fitment were best
7 Re: Stem seals 27th April 2015, 8:36 pm
Mr B
gtir technician
Give your Nissan man a slap in the face from me.
Just give them A UK sunny GTiR reg number
I will add part numbers for them when got time spare.
Just give them A UK sunny GTiR reg number
I will add part numbers for them when got time spare.
8 Re: Stem seals 27th April 2015, 8:55 pm
Gostek
Events Organiser
I was actually thinking to nick gtr from their display and drive it in to parts department 
I think I've got website somewhere with nissan parts no
http://nissan4u.com/parts/sunny/er_n14/1992_2/type_23/
I think I've got website somewhere with nissan parts no
http://nissan4u.com/parts/sunny/er_n14/1992_2/type_23/
9 Re: Stem seals 27th April 2015, 9:10 pm
Mr B
gtir technician
http://nissan4u.com/parts/sunny/er_n14/1992_2/type_23/engine_mechanical/cylinder_head_rocker_cover_camshaft_and_valve_mechanism/illustration_2/
http://nissan4u.com/parts/info/13207D0111/
http://nissan4u.com/parts/info/13207D4201/
Good idea with the gtr :-D
http://nissan4u.com/parts/info/13207D0111/
http://nissan4u.com/parts/info/13207D4201/
Good idea with the gtr :-D
Last edited by Mr B on 27th April 2015, 9:17 pm; edited 1 time in total
10 Re: Stem seals 27th April 2015, 9:15 pm
Gostek
Events Organiser
Awesome thanks Mr B i owe you some green tea again
_________________
11 Re: Stem seals 27th April 2015, 9:24 pm
Mr B
gtir technician
Okay that 2 green tea's you owe me :-)
Take those details on your phone or print it out, is couple alternative numbers if look at first link.
ICP do cometic viton seal kit for £20 but not sure I would trust it.
http://www.importcarparts.co.uk/parts-info?id=10575&cat=87&sub=119&sec=1184&var=0&dc=&gen=&searchKey=&searchPart=
Take those details on your phone or print it out, is couple alternative numbers if look at first link.
ICP do cometic viton seal kit for £20 but not sure I would trust it.
http://www.importcarparts.co.uk/parts-info?id=10575&cat=87&sub=119&sec=1184&var=0&dc=&gen=&searchKey=&searchPart=
12 Re: Stem seals 27th April 2015, 9:29 pm
Gostek
Events Organiser
well I've heard that cometic stuff is not that great and was looking at supertech which apparenly makes good stuff
http://www.steelconrods.co.uk/product_info.php?cPath=22_39_169&products_id=454
I'll see if nissan can help and I'll go from there
http://www.steelconrods.co.uk/product_info.php?cPath=22_39_169&products_id=454
I'll see if nissan can help and I'll go from there
_________________
13 Re: Stem seals 27th April 2015, 9:46 pm
Mr B
gtir technician
Yeh I go nissan OEM on these unless have supply issue, had issue with pattern valve seals before.
14 Re: Stem seals 27th April 2015, 11:51 pm
GTI-R US
Management
^^^ likewise
It's a job you don't want to have to do again so better off getting them from nissan
It's a job you don't want to have to do again so better off getting them from nissan
_________________
GTI-R-US.co.uk
In association with
Torque Of The South Motorsport
Nissan Performance & Tuning Centre
Services provided
Forge Engine rebuilds to specification
Body Restoration, Fabrication, Repair
Paint refinishing facilities
Ecu re-mapping-Performance upgrades
Auto Diagnostics, Injector cleaning
Race & Suspension setup
General Servicing, Mots, tyre fitting
Full workshop facilities
15 Re: Stem seals 28th April 2015, 6:26 pm
Gostek
Events Organiser
GTI-R US wrote:
It's a job you don't want to have to do again
Yeah I've done it once without taking head off it was lovely experience....
16 Re: Stem seals 28th April 2015, 7:33 pm
nomad
Admin
Did you do it with packing the bores mate ????
_________________
"Official post whore" and all round superhero....
17 Re: Stem seals 28th April 2015, 7:41 pm
Gostek
Events Organiser
Yes I've just put loads of garden yarn or whatever you call it just wanted something nice and soft and squeezable oh fook that just sounds wrong 
but yeah string compress it and funny looking spring compressor it went ok except last one when collet dropped inside cylinder
but yeah string compress it and funny looking spring compressor it went ok except last one when collet dropped inside cylinder _________________
18 Re: Stem seals 28th April 2015, 8:22 pm
Mr B
gtir technician
Yes they one of those items you don't want be revisiting when engine built up .
I've had after market that been poor looking fit so didn't use them & had issue with ones leaking within few months so stick to OEM when can. Have used cometic ones before but not on an R & was fine but I would want test on an R for a year before I would start recommending personally
Supertech seems 50/50 on opinion, a lot of mitsi builders had complaints.
Do think some issue is fitment on that though as have 2 types of seal pending on valve springs used, also if you got wear issues with valve stem & guide, seals won't work well. Nissan OEM seals are not a huge amount more if supplier friendly & if available it reduces potential issues on rebuild work.
I use Nissan cranks seals, rocker seals etc as far better & don't end up revisiting the job .
I've had after market that been poor looking fit so didn't use them & had issue with ones leaking within few months so stick to OEM when can. Have used cometic ones before but not on an R & was fine but I would want test on an R for a year before I would start recommending personally
Supertech seems 50/50 on opinion, a lot of mitsi builders had complaints.
Do think some issue is fitment on that though as have 2 types of seal pending on valve springs used, also if you got wear issues with valve stem & guide, seals won't work well. Nissan OEM seals are not a huge amount more if supplier friendly & if available it reduces potential issues on rebuild work.
I use Nissan cranks seals, rocker seals etc as far better & don't end up revisiting the job .
19 Re: Stem seals 28th April 2015, 9:05 pm
shroom
moderator
Gostek wrote:just wanted something nice and soft and squeezable
It sorted my seals out...
20 Re: Stem seals 28th April 2015, 9:07 pm
Mr B
gtir technician
^looks like your shaft leaking though :-S
21 Re: Stem seals 28th April 2015, 9:09 pm
Gostek
Events Organiser
Damn right it did!!!shroom wrote:
It sorted my seals out...
Message [Page 1 of 1]
Similar topics
Permissions in this forum:
You cannot reply to topics in this forum