Gtir Motorsport club
Would you like to react to this message? Create an account in a few clicks or log in to continue.
Gtir Motorsport club

Welcome to the largest Nissan Pulsar & Sunny GTI-R Forum. Masses of info, friendly members, cars for sale, lots of spares. Best forum on the net by far. Everything your gtir needs is here.


You are not connected. Please login or register

indicators...

4 posters

Go down  Message [Page 1 of 1]

1indicators... Empty indicators... 11th September 2014, 4:58 pm

richpulsar

richpulsar

Hi all got an issue with the front left indicator not working, already changed the bulb to rule that out and cant be the relay as it would knock out all the lights??

I need some help as I now dont know where to look

2indicators... Empty Re: indicators... 11th September 2014, 5:01 pm

nomad

nomad
Admin
Admin

Have you tried re-earthing the indicator ... and multimeter see if your getting any voltage ??????


_________________
"Official post whore" and all round superhero....

3indicators... Empty Re: indicators... 11th September 2014, 5:08 pm

richpulsar

richpulsar

I havent tried either of them things as with the earth where would I take it from the bulb connector??

4indicators... Empty Re: indicators... 11th September 2014, 5:09 pm

richpulsar

richpulsar

I'm bloody useless at anything to do with wiring so some help would be appreciated

5indicators... Empty Re: indicators... 11th September 2014, 6:51 pm

johnny gtir

johnny gtir
moderator
moderator

I guess at a snapped wire just back from the indicator where it goes to the bulb rich

6indicators... Empty Re: indicators... 11th September 2014, 7:18 pm

Turmoil

Turmoil

Had The same on mine...

It was the earth that slides up the side of the metal bulb holder bit...

I pushed the metal bit out cleaned the wire up and side of metal bit....
Put back together Sorted...

7indicators... Empty Re: indicators... 12th September 2014, 9:51 am

richpulsar

richpulsar

Ok i shall try that see if it sorts it cheers for the info guys

8indicators... Empty Re: indicators... 12th September 2014, 11:16 am

nomad

nomad
Admin
Admin

Yeah mate you can always run a piece of wire from any earth point touch it on the side of the bulb ....see if it comes on .... but ideally i would check make sure you have a feed going down there in the first place and clean everything thorougly first ...


_________________
"Official post whore" and all round superhero....

Sponsored content



Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum