T-cut?

My bodywork is not too bad at all. But when you look closely you can see very fine scratches.
I have polished the car before and clay bar.

But somebody told me I need to cut the car back what do they mean by this? Does it take a layer off the paint..
Any advice or tips thank you

My car is black by the way

I would keep away from t cut that's basically like sandpaper you'll have even more scratches with that if not used correctly,and yes cutting back the paint does remove a very fine layer of the paint,idearly if there's fine scratches use a product called limeprime by dodo juice this can be applied by hand or a foam pad or even better use a machine polisher,hope that helps

Would This do a better job than tcut? Or is it just easier to use

Yep much better and easier to use especially with a polisher

Would he not be better off using Poorboys SSR 2.5  ajay ?

Poorboys is a good choice too and outstanding results but personally i see this being more of a filler rather than a cutter,limeprime on the other hand has a slightly more better cut into the paint especially by using a machine so basically better to remove scratches instead of filling.

And thats why your the proffesional and im not lol ...

Haha I try my best easiest way to explain to the owners there so much to it but I won't go into detail otherwise think I'm mad lol

Mr nomad the ssr 2.5 is good but does cause marring on our top coat if we are not carful with it as Ajay said line prime is very good

just get a broom and give it a damned good scrubbing with a bit of strong detergent

don't listen to ajay or indy there just detailers and don't know anything   




































btw im joking about the detergent   

Whats marring ?
You forget the brillo pad bob   

Lol @ brush and detergent

Mr nomad marring is a form of smudging of the top coat due to excess machining where the compound being used has broken down soo much and it's physical property has changed .... Er just read that back to myself lol I'm confused

Basically it's smudging of the top coat if too much or too little product is used for a very long or short time in one area lol that's even more confusing doh

Lol thanks guys! I shall definitely try it out

So do I wash the car then apply this and then wax or polish the car?

I only have auto glym deep shine polish

Cheers indy .....i know exactly what you mean ......

For paint buffties the pulsars paint work is piss poor, you can scratch it just by looking at it.

Your welcome mr nomad
Or you can scratch the paint work by farting next to it at a distance of approx 1 meter after a vindaloo lol

Turbazz make sure u de grease the car first so the correct process would be
1) degrease everywhere
2) wash car
3) clay car using clay bar if u want to be anal
4) wash off clay
5) dry car
6) start machining (polishing)
7) wipe off polish
use a solvent to remove all polish (this is pre wax stage)
9) wax car
10) stand back and admire ur hard work

Please note this is not going to happen in 2 hours or so, to do the job properly give yourself aleast 1 full day it's a real tedious process and make sure you have a lot of pain killer tablets to hand as your back will really hurt after lol

Lol thanks guys! I shall definitely try it out

So do I wash the car then apply this and then wax or polish the car?

I only have auto glym deep shine polish